In-Development Standards

Standards In Development Sponsored by IAS

The following chart is a list of IEEE IAS-sponsored standards currently being developed. Please contact Keith Waters if you would like to join any of the working groups active in standards or to initiate a new standard, or if you would like any further information.

PAR NumberProject TypeCommitteeProject TitleProject Status
P1068RevisionIAS/PCI/1068_WGStandard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process IndustriesDraft Development
P114RevisionIAS/IPCSD/SPIMStandard Test Procedure for Single-Phase Induction MotorsDraft Development
P1242RevisionIAS/PCI/P1242 WGGuide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical PlantsDraft Development
P1566RevisionIAS/PCI/1566_WGStandard for Performance of Adjustable-Speed AC Drives Rated 375 kW and LargerDraft Development
P1584.2NewIAS/PCI/1584_WGGuide and Checklists for the Data Collection for Performing an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std. 1584™ and IEEE Std.1584.1™ for Systems Operating at Three-Phase 50/60 Hz Alternating Current (AC) 1000 V and belowRevCom Agenda(07 May 2025)
P1668RevisionIAS/ICPS/SDC/P1668Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 VDraft Development
P1683RevisionIAS/PCI/1683_WGGuide for Motor Control Centers Rated up to and including 600 V AC or 1000 V DC with Recommendations Intended to Help Reduce Electrical HazardsSA Ballot: Comment Resolution
P1810RevisionIAS/PCI/1810 WGGuide for the Installation of Circuit-Integrity Cables Evaluated for Hydrocarbon Pool Fires in Petroleum and Chemical FacilitiesSA Ballot: Recirculation Review
P1814NewIAS/PCI/1814_WGGuide for Electrical System Design Techniques to Enhance Electrical Safety – System Planning, Equipment, ProtectionDraft Development
P2943NewIAS/IPCSD/IDCWGRecommended Practice for Testing Energy Efficiency of Variable Frequency Drive SystemsSA Ballot: Pre-Ballot
P2964NewIAS/IPCSD/DPTIGDStandard for Datasheet Parameters and Tests for Integrated Gate DriversDraft Development
P2969NewIAS/PCI/P2969_CTMGuide for Continuous Thermal Monitoring of Switchgear and Motor Control Centers up to 52 kVSA Ballot: Recirculation Review
P3001.1NewIAS/ICPS/SDC/P3001.1WGRecommended Practice for the Planning and Design of Industrial and Commercial Power SystemsSA Ballot: Comment Resolution
P3002.9NewIAS/ICPS/SDC/P3002.9 WGRecommended Practice for Conducting Transient Stability Studies and Analysis of Industrial and Commercial Power SystemsDraft Development
P3003.4NewIAS/ICPS/SDC/P3003.4WGRecommended Practice for Connections to Earth for Alternating Current (AC) Industrial and Commercial Power Systems FacilitiesSA Ballot: Recirculation Review
P3004.1RevisionIAS/ICPS/SDC/Standard 3004.1 WGRecommended Practice for the Application of Instrument Transformers in Industrial and Commercial Power SystemsDraft Development
P3004.8RevisionIAS/ICPS/SDC/P3004.8Recommended Practice for Motor Protection in Industrial and Commercial Power SystemsDraft Development
P3004.9NewIAS/ICPS/SDC/3004.9 WGRecommended Practice for the Protection of Transformers Used in Industrial and Commercial Power SystemsSA Ballot: Comment Resolution
P3005.2NewIAS/ICPS/SDC/E&SPWGRecommended Practice for Application of Generator Systems for Emergency and Standby Power in Industrial and Commercial Power Systems.Draft Development
P3005.7NewIAS/ICPS/SDC/EMWG-P3005.7Recommended Practice for Application of Metering for Energy Management of Industrial and Commercial Power SystemsDraft Development
P3006.1NewIAS/ICPS/SDC/P3006.1WGRecommended Practice for Reliability Planning and Design of Industrial and Commercial Power SystemsSA Ballot: Comment Resolution
P3114NewIAS/IPCSD/DPTPUVLEDStandard for Datasheet Parameters and Testing Protocols for Ultraviolet (UV) Light-emitting Diodes (LEDs)Draft Development
P3371NewIAS/PPIC/PPIC- CDG (P3371)Recommended practice for Coordinated Drive Systems for Electrical AC Motors Operating on Three Phase, 50 Hz or 60 Hz, 1000 V and Below for Pulp and Paper Industry InstallationsDraft Development
P3372NewIAS/METC/AFTWGGuide for the Functional Specification of Arc Furnace Transformers: 10 MVA to 200 MVA, High Voltage 69 kV ac and below, Low Voltage 1250 V ac and belowDraft Development
P3457NewIAS/ICPS/SDC/GESTGuide for Energy-saving Lightweight Transformation and Operating Maintenance of Electric Facilities in Existing Buildings in Industrial and Commercial InstallationsRevCom Agenda(07 May 2025)
P3542NewIAS/IPCSD/EC-FIMDStandard for Efficiency Classification of 15kW-500kW Fully Integrated Motor Drives when Fed from Three Phase Supplies Up to 500VACDraft Development
P3543NewIAS/IPCSD/PQ-FIMDStandard for Power Quality Requirements for 15kW-500kW Fully Integrated Motor Drives when Fed from Three Phase Supplies Up to 500VACDraft Development
P3544NewIAS/IPCSD/DIRPFCVSDStandard for Data Exchange Requirements for Power Factor Correction in Distributed Variable Frequency Motors DrivesDraft Development
P3548NewIAS/ICPS/SDC/PEDFBRecommended Practice for the Structural Design of Distribution Grid in Photovoltaic-Energy Storage-DC-Flexible Integrated BuildingsDraft Development
P45.3RevisionIAS/PCI/45_WGRecommended Practice for Shipboard Electrical Installations -- Systems EngineeringRevCom Agenda(07 May 2025)
P45.7RevisionIAS/PCI/45_WGRecommended Practice for Electrical Installations on Shipboard -- AC SwitchboardsDraft Development
P45.8RevisionIAS/PCI/45_WGRecommended Practice for Electrical Installations on Shipboard--Cable SystemsDraft Development
P493RevisionIAS/ICPS/SDC/Gold Book WG - P493Recommended Practice for the Design of Reliable Industrial and Commercial Power SystemsDraft Development
P60079-30-1RevisionIAS/PCI/60079-30_WGInternational Standard - Explosive atmospheres -- Part 30-1: Electrical resistance trace heating -- General and testing requirementsSA Ballot: Comment Resolution
P60079-30-2RevisionIAS/PCI/60079-30_WGInternational Standard for Explosive atmospheres -- Part 30-2: Electrical resistance trace heating -- Application guide for design, installation and maintenanceSA Ballot: Comment Resolution
P61886.2-2023/Cor 1CorrigendumIAS/PCI/SubseaElecIEEE/IEC Approved Draft International Standard - Subsea Power Transformers - Corrigendum 1RevCom Agenda(07 May 2025)
P61886.3NewIAS/PCI/SubseaElecSubsea Equipment – Part 3: Subsea MotorsDraft Development
P80005-3NewIAS/PCI/ShorePwrUtility Connections in Port - Part 3: Low Voltage Shore Connection (LVSC) Systems - General RequirementsSA Ballot: Comment Resolution
P80005-4NewIAS/PCI/ShorePwrUtility Connections in Port – Part 4: DC shore connection (DCSC) systems – General requirementsDraft Development
P844.1RevisionIAS/PCI/844WGIEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures - General, Testing, Marking, and Documentation RequirementsDraft Development
P844.2RevisionIAS/PCI/844WGIEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures--Application Guide for Design, Installation, Testing, Commissioning, and MaintenanceDraft Development
P902RevisionIAS/ICPS/SDC/Yellow Book WG - P902Recommended Practice for Maintenance and Operational Safety of Electrical Power Distribution Systems in Industrial and Commercial FacilitiesDraft Development